E-10
Control unit
Minimum RMS Output Power per Channel
........................ 20W + 20W (20 Hz–20 kHz, 6Ω, 0.4% THD)
Maximum Power .......... 26W + 26W (1 kHz, 6Ω, 10% THD)
Input Sensitivity/Input Impedance
PC IN, AUX1 IN, AUX2 IN (ANALOG) ........ 150 mV/35 kΩ
Maximum Input Signal
PC, AUX1, AUX2 .............................. 2.1V or more (1 kHz)
Output Level/Output Impedance
REC OUT ................................................... 150 mV/2.0 kΩ
SUBWOOFER OUTPUT .................... 2.0V/1.7 kΩ (50 Hz)
Headphone Jack Output Level/Output Impedance
ANALOG PC IN, etc. ..........320 mV/61Ω (1 kHz, 150 mV)
Frequency Response
USB, DIGITAL IN (PC, AUX1) to SP Output
.................................................... 20 Hz–20 kHz (ע1.0 dB)
Total Harmonic Distortion (1 kHz, 20 kLPF)
USB, DIGITAL IN (PC, AUX1) to SP Output
........................................................ 0.06% or less (4V/6Ω)
Signal to Noise Ratio
USB to SP Output ...................... 85 dB or more (11V/6Ω)
PC IN, AUX1 IN (DIGITAL) to SP Output
..................................................... 90 dB or more (11V/6Ω)
Residual Noise (IHF-A Network)
......................................... –68 dB or less (SP Output, L/R)
Power Supply
[U.S.A. and Canada models] .................. AC 120V, 60 Hz
[Europe and U.K. models] ...................... AC 230V, 50 Hz
[Australia model] .................................... AC 240V, 50 Hz
Power Consumption
[U.S.A. and Canada models] .................................... 60W
[Europe, U.K. and Australia models] ....................... 55W
Dimensions (W ן H ן D) ..............120 ן 294 ן 355 mm
(4-3/4” ן 11-9/16” ן 14”)
Weight ................................................. 5.5 kg (12 lbs. 2 oz.)
Specifications
Satellite speaker
Type ............... 2-way 2-speaker bass-reflex speaker system
Magnetically shielded type
Driver
Woofer ........................................9 cm (3-9/16”) cone type
Tweeter ........................... 2.5 cm (1”) balanced dome type
Nominal Input Power .................................................. 40W
Maximum Input Power .............................................. 100W
Impedance ...................................................................... 6Ω
Frequency Response ................................. 75 Hz – 33 kHz
Sensitivity .................................................... 88 dB/2.83V/m
Crossover Frequency ................................................7 kHz
Dimensions (W x H x D) ....... 107 mm x 191 mm x 141 mm
(4-3/16” x 7-1/2” x 5-9/16”)
Weight ..............................................1.5 kg (3 lbs. 5 oz.) x 4
Subwoofer
Type ................Active Servo Processing Subwoofer System
Driver ............................... 20 cm (8”) cone woofer (JA2162)
Magnetically shielded type
Amplifier Output .....................................................70W/5Ω
High-Cut Filter ...................... 50 Hz – 150 Hz (–24 dB/oct.)
Frequency Response .................. 30 Hz – 200 Hz (–10 dB)
Dimensions (W x H x D) ....... 235 mm x 365 mm x 318 mm
(9-5/16” x 14-7/20” x 12-1/2”)
Weight .................................................. 9 kg (19 lbs. 13 oz.)
Accessories
Mini plug cable x 2
Optical fiber cable x 1
Coaxial cable x 1
Stand for the amplifier unit x 1
Screw x 2
Pad x 16
* Please note that all specifications are subject to change
without notice.
SR601ENG(9/29)e 00.9.29, 2:34 PM10
