Chapter 3 Access Point Mode
WAP3205 v2 User’s Guide
20
The following table describes the labels shown in the Status screen.
Table 4 Status Screen: Access Point Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the WAP3205 v2’s model name.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2 is set - Access
Point Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
Default Gateway This shows the gateway IP address.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information
WLAN OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2’s wireless LAN
is set - Access Point Mode.
MAC Address This shows the wireless adapter MAC Address of your device.
Status This shows the current status of the Wireless LAN - ON.
Name (SSID) This shows a descriptive name used to identify the WAP3205 v2 in the wireless LAN.
Channel This shows the channel number which you select manually or the WAP3205 v2 automatically
scans and selects.
Operating Channel This shows the channel number which the WAP3205 v2 is currently using over the wireless
LAN.
Security Mode This shows the level of wireless security the WAP3205 v2 is using.
802.11 Mode This shows the wireless standard.
WPS This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
Interface Status
Interface This displays the WAP3205 v2 port types. The port types are: LAN and WLAN.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
System Status
Item This column shows the type of data the WAP3205 v2 is recording.
Data This column shows the actual data recorded by the WAP3205 v2.
System Up Time This is the total time the WAP3205 v2 has been on.
Current Date/Time This field displays your WAP3205 v2’s present date and time.
System Resource
