3Com 61-362 Dishwasher User Manual


  Open as PDF
of 7
 
Page 5
Replacing Fuse (refer to Figure 3)
1. Disconnect the test leads and turn the range switch to “OFF”.
2. Remove the three screws holding the bottom case cover
3 Us a digital multimeter in low resistance {ohms} mode to check the two fuses
mA input, 0.5A / 250V fast acting fuse.
Amp input, 10A / 600V fast acting fuse
4. Remove the defective fuse with the recommended fuse
mA with : 0.5A/250V fast acting fuse Type LA-3895 is recommended.
Amp with: 10A/600V fast acting fuse, Type LA-3897 is recommended
5. Install bottom cover and secure with screws.
Form number 61362 rev 1 May 2002
 previous