Filter
Top Products
Focusing the image
Use the focus dial located on the bottom of the SMARTUX60 projector to focus the projected image.
g To focus and adjust the image
Turn the focus dial clockwise or counterclockwise until the image is in focus.
Adjusting the image
Refer to these notes when adjusting the projected image as described in the included SMARTBoard
880ix interactive whiteboard system installation guide (smarttech.com/kb/149616).
Refer to these notes when adjusting the projected image as described in the included SMARTBoard
885ix interactive whiteboard system installation guide (smarttech.com/kb/149616) or SMARTBoard
885ix-SMP interactive whiteboard system installation guide (smarttech.com/kb/170129).
l While adjusting the projected image size, shape and location, use the projector’s default
background so that you can see the full projected image clearly. Don’t use other images, which
might be cropped or scaled by the projector and result in a misleading projected image size,
shape, and location.
l Use the mechanical adjustments described in the installation document to make all physical
image adjustments. Don’t use the projector’s on-screen menu options during the projector
alignment process.
l Make sure that the screws supporting the adjustment module are tightened so the projector
doesn’t move on the wall-mounting bracket’s track. Also, make sure that the image adjustment
restrictors (screws and collars) are loosened when adjusting the image, or image adjustment
will be difficult or impossible.
l Use only the color-coded control knobs on the top of the projector’s adjustment module and
always unlock the locking ring to adjust the projector’s image.
C HA PTER 3
Usingyour interactive whiteboardsystem
21