Filter
Top Products
2. Connect a VGA cable from the laptop computer to the VGA connection kit.
OR
Connect an HDMI cable from the laptop computer to the projector.
3. Press the Input button on the ECP or remote control to switch input sources to the laptop
computer.
g To connect a DVD/Blu-ray player or similar device
1. If you have speakers installed, turn the volume dial on the ECP all the way down to prevent
buzzing or sparking.
2. Connect your peripheral device’s input cables to the receptacles on the projector or to the
optional RCA connector pod.
3. Press the Input button on the ECP or remote control to switch input sources to the peripheral
device.
4. Restore the volume on the ECP’s volume dial.
C HA PTER 4
Integratingother devices
33