3Com Z340PL Dishwasher User Manual


  Open as PDF
of 6
 
6
PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL
8.
Check for proper orientation and alignment of the pins; pin 1 should
be oriented toward the network card end of the main board. Also
ensure the bins are not bent. Gently install the new ROM in its socket.
Carefully, inspect the ROM to ensure all the pins are properly inserted
in the socket and are not bent or mis-installed.
9.
Reinstall the main board into the printer; tighten the thumbscrews.
10. Network Card Upgrade.
If necessary, install a network card upgrade kit
4676UP1 or 4676UP4. Instructions are included with the network card
upgrade. The upgrade also includes new user and network manuals
and a CD-ROM for your printer.
11.
Turn printer on and allow it to warm up.
12.
Refer to the
PhaserShare Network Cards and Software System
Administration Manual
and the
Phasershare Status Software User Manual
that came with the 4676UP1 or 4676UP4 upgrade kit for details on
using PhaserLink.
Setting the printer’s IP address
How you set the IP address in your printer depends on a number of factors such
as the protocol used by your host TCP/IP network, whether or not you use a
boot server, and the types of PCs or workstations available to you. The topic of
setting the printer’s IP address is fully explained in the Chapter 9 topic
“Configuring your printer” in the
PhaserShare Network Cards and Software User
Manual
. The instructions for setting the printer’s IP address are also available on
the Tektronix web page: http://www.tek.com/Color_Printers/userdoc.
Return the old ROMs to Tektronix
1.
Repack the old PostScript code ROM SIMM and the print engine ROM
in the anti-static bags. Place them in the shipping box.
2.
In the U.S.A.:
a.
Write the printer’s original serial number on the shipping return
label.
b.
Securely tape the box closed and mail it to the pre-addressed
location. Postage is prepaid.
Outside the U.S.A.:
a.
Affix the special international shipping return label, included with
this update kit, to conceal the original U.S. shipping label.
b.
Write the printer’s serial number on the shipping return label.
c.
Tape the box closed and ship the box to Tektronix, using your
respective country’s shipping method.
 previous