3D Connexion MB DMX Coffeemaker User Manual


 
©American DJ® - www.americandj.com - MB DMX™ Instruction Manual Page 3
MB DMX™ Safety Precautions
©American DJ® - www.americandj.com - MB DMX™ Instruction Manual Page 4
Safety Issues:
To reduce the risk of electrical shock or re, do not expose this
unit rain or moisture
Do not spill water or other liquids into or on to your unit
Do not attempt to operate this unit if the power cord has been
frayed or broken
Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of
electrical shock and re in case of an internal short
Disconnect from main power before making any type of connection
Do not remove the cover under any conditions. There are no user
serviceable parts inside
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
Do not attempt to operate this unit, if it becomes damaged
This unit is intended for indoor use only, use of this product
outdoors voids all warranties
During long periods of non-use, disconnect the unit’s main power
Always mount this unit in safe and stable matter
Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
General Instructions: To optimize the performance of this product,
please read these operating instructions carefully to familiarize your-
self with the basic operations of this unit. These instructions contain
important safety information regarding the use and maintenance of
this unit. Please keep this manual with the unit, for future reference.
Unpacking: Thank you for purchasing the MB DMX™ by American
DJ®. Every MB DMX™ has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without rst contact-
ing customer support.
Introduction: The MB DMX™ is a unique intelligent mirror ball motor
that may be operated in three modes; DMX-512, Stand-Alone, or Master/
Slave. The MB DMX™ allows you to control the operation of a mirror ball
motor as well as the lamps via DMX operation. You may also link sev-
eral MB DMX™ motors together to obtain universal speed and rotation.
An optional MINI/C black out controller may be purchased separately.
Customer Support: American DJ® provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. Service Hours are Monday through Friday 9:00
a.m. to 5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact your nearest American DJ® dealer.
MB DMX™ General Information