Filter
Top Products
12
Installing on a Macintosh
Follow these steps to install the printer software on your
Macintosh from the CD-ROM or from diskettes you created or
downloaded. (If you install the printer software from diskettes,
the Look Your Best Color Pak Electronic Suite is not installed.)
1. Turn on your Macintosh and turn off any virus protection
programs you may have. (See your virus protection
documentation for instructions.)
2. When your Macintosh has finished starting up, turn on
your printer.
3. Insert the EPSON printer software CD-ROM (or diskette 1)
in your drive.
4. Double-click the EPSON Installer (or Installer) icon.
Then click Continue to display the Installer Script dialog
box.
5. Click Install and follow the instructions on the screen to
copy the software to your hard disk. After the files are
copied, a message tells you that installation complete.
6. Click Restart to restart your Macintosh.
Note:
If your Macintosh
doesn’t have a CD-ROM
drive, you can make
install diskettes from the
CD-ROM using another
Macintosh. See “Making
Macintosh Diskettes
from the CD-ROM” on
page 14 for instructions.
Fiji Quick setup Rev.1 5/22/97, 10:16 AM12