Filter
Top Products
3
Important: Acme Supreme Juicerator
®
should be unplugged from outlet when
disassembling and assembling.
DISASSEMBLING
• After removing your new Juicerator
®
from the box, you may want to
familiarize yourself with the parts by
disassembling the unit and washing
the top parts. (See Figure 1)
• With Juicerator
®
facing you
(spout front), put your hands on
both sides of the cover. Using the
side arms for leverage, push back
with your left hand and pull forward
with your right turning the cover
clockwise. This will disengage
the cover from the spring clips and
allow disengage the lid safety
interlock.
• Look into Juicerator
®
and
remove clutch by unscrewing
counterclockwise.
• Lift out cutter blade.
• Lift out strainer basket.
• Lift off juice bowl.
ASSEMBLING
• Place bowl on motor base housing and place the spout facing front
between the two raised projections on the motor base housing.
• Place strainer basket inside the bowl over the hex nut. Be certain the
strainer basket sits at.
• Place cutter blade inside strainer basket with teeth up.
• Tighten clutch by hand until tight or snug.
• If using disposable lter, insert it at against the holes around the inside of
the strainer basket. Once the Juicerator
®
is running, centrifugal force will
push the lter into perfect position.
• Place cover on juice bowl with feed chute at the right rear, grip the sides
of the lid rmly and turn counterclockwise to engage the spring clips and
the safety interlock.
Figure 1