27
Your appliance needs air
Air flows in from under the
door, at the front, and flows out
upwards, over the back. For
correct air circulation, it is
important that the ventilation
openings are not covered or
obstructed.
Important! If the appliance is
positioned under a kitchen wall
unit, a minimum clearance of
10 cm must be left between
the top of the appliance and
the overhanging wall unit.
Rear spacers
Fit the rear spacers contained
in the documentation bag to
ensure even dissipation of
heat genereted during opera-
tion. Proceed in the sequence
illustrated by the figures.
PR153
Levelling the appliance
Place the appliance on a flat
hard floor. Two adjustable feet
on the front of the appliance
enable it to accurately levelled
by screwingthem in or out as
required.
AEG70
Rehingeing the door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the
appliance may not be connected to the mains. Remove plug from the
mains before hand.