11
q
Installation and Connection
This appliance complies with the following EC Directives :
EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC with amendment
90/683/EEC and the CE marking Directive 93/68/EEC.
Table top model
A gap all around the oven is
necessary in order to ensure perfect
ventilation:
Above: 14 cm
Behind: 10 cm
Either side: 5 cm
5 cm
14 cm
10 cm
5 cm
The oven should be set on a work surface at least 85 cm above
floor level. To ensure the stability of the microwave oven, the
front left foot is adjustable (5 positions). Turn it to raise or
lower the appliance. Make sure that nothing obstructs the
ventilation louvres and that air may circulate freely around the
oven.
Built-in model
To install the appliance in a kitchen cabinet, use the appropriate mounting
frame. Note the relevant instructions for installation and connection.
When building in to a high cabinet, you may use the liftdoor. Note the
relevant information for installation and connection given in the operation
instructions of the lift door.
Attention !
Never operate the microwave oven with the lift door closed. Such
operation would damage your appliance and invalidate the guarantee.
1