AEG 40260 I Dishwasher User Manual


 
Installation and Connection Instructions
30
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installing the Dishwasher
• The dishwasher must be installed on a firm floor and adjusted to
ensure that it is stable and level.
To compensate for unevenness in the
floor and to match the height of the
appliance to that of surrounding units
extend the threaded feet by unscrew-
ing:
– use a screwdriver.
For built-in, integrated and fully inte-
grated dishwashers, the rear feet
should be adjusted from the front of
the appliance using a screwdriver.
• The drain hose, inlet hose and mains
cable must not be kinked or crushed
when the dishwasher is in position.
• The dishwasher must also be screwed on tightly to the work surface
or to the adjoining units. This is essential to ensure the dishwasher
does not tip.
Dishwashers That Can Be Integrated
(see installation template supplied)
3
The door of the appliance can be fitted with a wooden furniture door
with the following dimensions:
Width: 591 – 594 mm
Thickness: 16 – 24 mm
Height:
(variable)
dependent on
Recess height
Plinth height
The adjustment so that the unit matches the height of
the adjoining units
The exact height of the adjoining units must be
measured at the place of installation.
Weight: max. 8 kg