Filter
Top Products
Operating Instructions
28
Interrupting the wash programme by opening the dishwasher door
1
Hot steam may escape when the door is opened. There is a risk of scald-
ing. Open the door carefully.
0 1. Open the door of the dishwasher.
The wash programme will stop.
2. Close the door.
The wash programme will continue.
Cancelling the wash programme (RESET)
0 1. Press function buttons 2 and 3 and keep them pressed.
The programme display for the current wash programme will flash for
several seconds and then go out.
2. Release the function buttons.
The wash programme has been cancelled.
3
Turning off the dishwasher will only interrupt a selected wash pro-
gramme, not cancel it. The wash programme will recommence after
turning the dishwasher back on again.
Setting or changing the start delay
Using the start delay you can set whether a wash programme is to
begin in 3, 6 or 9 hours.
Setting the start delay:
0 1. Press the ON/OFF button.
2. Press the b start delay button until the indicator next to the number
of hours until the wash programme starts is illuminated.
3. Press the button for the desired wash programme.
The LED indicator for the programme selected and the indicator next to
the number of hours will illuminate.
The wash programme will start automatically following a countdown
of the hours set.
Changing the start delay:
As long as the wash programme has not yet started, you can change
the start delay set by pressing the START DELAY button.
Cancelling the start delay:
As long as the wash programme has not yet started, you can cancel the
start delay. Press the START DELAY button until none of the three time
displays are illuminated. The selected wash programme will begin
immediately.