Filter
Top Products
Operating Instructions
33
After remedying the error that is flashing in the first or second
sequence in the programme progress display, press the button for the
wash programme that had already started. The wash programme will
continue.
If the fault is displayed again, please contact your local Service Force
Centre.
3
For all other errors displayed, please contact Service Force, stating the
error code. (See chapter “Customer Service”).
The programme indicator
for the selected wash pro-
gramme is flashing,
the end wash programme
indicator is flashing in the
following sequence: 2 short
flashes one after the other.
The siphon is blocked. Clean out siphon.
The water drain hose has
not been correctly laid.
Check hose installation.
The end wash programme
indicator is flashing in the
following sequence: 3 short
flashes, one after the other.
The leak prevention sys-
tem has been triggered.
Turn off the tap and con-
tact customer service.
Malfunction Possible cause Remedy