Filter
Top Products
Operating Instructions
14
3. Fill with rinse aid, up to the broken
line as a maximum; this line corre-
sponds to a quantity of approx.
150 ml
4. Replace the lid and tighten by turn-
ing clockwise.
5. If rinse aid has been spilt, wipe up
with a cloth. Otherwise there will be
too much foam during washing.
Adjusting Rinse Aid Dosing
3
Rinse aid is added to the wash water from the container when the
dishes are rinsed. The dose can be adjusted from 1-6, corresponding to
1-6 cm
3
rinse aid. The dose is set to "4" in the factory. Only change the
dose when streaks, milky spots or dried water drops are to be seen on
glasses and dishes.
(see under "What to do, if...").
0 1. Turn the lid of the container
¼ of a turn anticlockwise and
remove.
2. Adjust the dose setting with a tea
spoon.
3. Replace the lid and tighten by turn-
ing clockwise.
4. If rinse aid has run out, wipe up with
a cloth.
m
a
x
6
5
4
3
2
1