Filter
Top Products
Operating Instructions
27
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
...Error Messages Are Displayed.
• If the L or I indicator on the programme progress display is
flashing, you can probably rectify the fault yourself.
After rectifying an
L or I fault, press the button for the wash
programme that has been started. The wash programme continues. If
the fault is displayed again, contact customer service.
• If indicators for other programme steps on the programme progress
display are flashing, please contact customer service and state the
fault indicated.
Malfunction Possible Cause Remedy
L on the programme
progress display is
flashing:
no water is running
into the dishwasher.
Tap is closed. Open tap.
The filter in the threaded
hose fitting is blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is not
correctly laid.
Check hose installation.
I on the programme
progress display is
flashing.
The siphon is blocked. Clean siphon.
The water drain hose is not
correctly laid.
Check hose installation.
L and I on the
programme progress
display are flashing
simultaneously.
The leak prevention system
has been triggered.
Close the tap and contact
customer service.