Filter
Top Products
Operating instructions
14
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness switch to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b) Setting electronically
The dishwasher is factory set at level 5.
With the help of the table, set the level corresponding to hardness
of the water in your area.
1. Press OPTION button
2. Press DIRECTION buttons until SETTINGS... is displayed
3. Press OK START button
4. Press DIRECTION buttons until WATER HARDNESS is displayed
3. Press OK START button
4. Press DIRECTION buttons until the level corresponding to hardness
of water in your area is displayed.
5. Press OK START button to confirm the setting
6. Press OPTION button to exit the Options menu.
AA07
152963991en per CH.qxp 03/08/2004 13.38 Pagina 14