Filter
Top Products
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
The core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat is
at the set temperature, the cooking programme deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table for roasting in the recipe book.
• The core temperature: refer to the table for the core temperature sensor in the recipe
book.
Only use the core temperature sensor supplied or original replacement parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor in the centre of the meat.
3. Put the plug of the core temperature
sensor in the socket at the side wall of
the appliance.
The display shows a flashing symbol
and the default set core tempera-
ture. The temperature is 60 °C during
the first use, and the last set value dur-
ing each subsequent use.
4. Touch
or to set the core temper-
ature.
5. Touch
or the settings save automatically after 5 seconds.
You can set the core temperature only when the symbol flashes. If the display shows a
static symbol
before you set the core temperature, use and or to set a new
value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and
(which shows the relation be-
tween the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the value of the Count Up
Timer function shows in the Timer/Residual heat display. When the first calculation ends,
the Timer/Residual heat display shows "-", and then the approximate duration of the cook-
ing.
The appliance continues to calculate the duration during the cooking. The display updates
at intervals with the new duration value.
2
1
18 Using the accessories