Filter
Top Products
22
However, to ensure accessi-
bility to the gas connection
there should generally be at
least 50 mm between the rear
of the hole for the gas hob
and the wall behind it.
1. Cut a hole in the worktop of the
given dimensions, see “Technical
data”, “installation dimensions”.
2. Place the hob upside down on a
soft underlay. Make sure not to
scratch the top surface.
3. Mount the fixings in the holes in
the sides of the base box. (See
fig.).
4. Insert the hob in the hole and
tighten the fixings to the worktop
with a screwdriver.
Mounted clamping fittings