Agilent Technologies 53151A Microwave Oven User Manual


 
Chapter 2 Operating Your Frequency Counter
Using Power Correction
Operating Guide 2-35
2
Power Correction Example: Editing Data Point Values
1 Select a power-correction profile using the up- and/or
down-arrow keys (as shown in steps 1 through 4 in the previous
example). For this example, choose profile number 3.
2 Press the right-arrow key.
The display changes to show the loss and frequency values stored in the
data point that contains the lowest frequency value in the current profile.
The left and right pointers that are before and after the word “LOSS” are
flashing.
The ten small, single-line annunciators that are below the analog power
display are used to indicate which of the ten data points is currently
displayed. In the example shown above, only the first annunciator is
activated, which indicates that the values displayed are for data point 1,
the lowest data point.
dB