Filter
Top Products
TABLETOP SOLUTIONS
400-0464-003 11
INSTALLING YOUR PNP515 6
Step 1. Refer to the ALTINEX website,
www.altinex.com, to download the latest
templates and instructions for tabletop
cutting requirements and installation
instructions.
In order to do this, locate the PNP515 on
the website and go to its detail page. The
links to the templates, user’s guide, and
more are on the left-hand side of the
screen.
Step 2. Print all information applicable to the
installation of the PNP515, including the
templates and any detailed installation
instructions.
Step 3. Cut an opening into the table’s surface.
This operation should be performed by
experienced professionals in order to
insure accuracy and to be aesthetically
pleasing.
NOTE: Always confirm dimensions before
cutting to insure that specifications have
not changed.
Step 4. Install the PNP515 into the table per the
installation instructions provided on the
website.
Step 5. Connect all cables to their appropriate
sources and/or destinations. The PNP is
now ready for operation.
OPERATION 7
7.1 OPENING AND CLOSING THE PNP515
The PNP will open easily when the top is pressed
down and then released.
When the PNP is not in use, simply press the top
down until it is level with the surface of the table
and then release. The unit will remain hidden until
needed again.
7.2 POWER/SIGNAL CONNECTIONS
Connect external devices to the appropriate
connector on the PNP. Remember, the devices
plugged into the AC power connectors should not
draw more than 5A AC.
TROUBLESHOOTING GUIDE 8
The PNP unit supplied was carefully tested and no
problems were detected. However, we would like to
offer the following suggestions:
• Please make sure that the highest quality
network cables are used.
• Make sure that no cable or power cord is
damaged or pinched. If there has been damage
to the unit, do not use the PNP. Please contact
ALTINEX at (714) 990-2300 to have the unit
repaired.
ALTINEX POLICIES 9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
www.altinex.com for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com