Filter
Top Products
TABLETOP SOLUTIONS
400-0464-003 3
ABOUT YOUR PNP515/517 2
PNP515/517
Pop ‘N Plug with Custom Tabletop Surface
• Customizable to almost any table top
• Several standard international configurations
• Smooth new look on all sides
• Cutout always matches table surface
• Simple, slide-in installation
• Opens/closes by pressing on top
• Gas spring lift mechanism
This Pop ‘N Plug uses a custom tabletop cutout
surface, and hardware is attached underneath the
cutout. When closed, the PNP515/517 lays flat and
matches the grain on your table.
The PNP515/517 design allows the connector
panels to be easily installed. Just remove the top
and slide the connector panels into place. In the
open position, the PNP515/517 is functional yet
maintains a smooth, clean appearance. A simple
press on the lid closes the unit flush with the
tabletop.
The PNP515 can be purchased with preconfigured
options available that include two standard
sectional plates.* Each plate includes one or more
of the following: AC power, computer video, stereo
audio, modem, or network connections. The AC
power receptacles on the face plates are available
with US or international connections.
All connectors on the face plates are female
receptacles. Each signal connector is connected
via a 6-foot cable to its corresponding male plug at
the opposite end. The AC power cables are 9-foot
cords terminated with standard NEMA plugs for the
US version, or with the applicable plug for
international versions.
* See DIAGRAM 6 and DIAGRAM 7 for the
available standard plates on both US and
international units.
TECHNICAL SPECIFICATIONS 3
Specifications are subject to change.
See www.altinex.com for up-to-date information.
FEATURES/
DESCRIPTION
PNP515/517
Inputs (female) /
Outputs (male)
PNP517
AC Power NEMA 5-15 (8)
Video 15-pin HD (4)
Computer Audio 3.5mm (4)
Network RJ-45 (4)
Modem RJ-11 (4)
C-Video RCA (2)
Compatibility PNP515
Accepts DS901
STANDARD
sectional plates. *
DS901-122 for UK,
DS901-123 for Australia,
DS901-124 for Germany,
DS901-128 blank,
DS901-130 for US
Accepts DS901
CONFIGURABLE
sectional plates. *
DS901-125 for UK,
DS901-126 for Australia,
DS901-127 for Germany,
DS901-131 for US
Table 1. PNP515 General
MECHANICAL PNP515/517
Min. Table Thickness 0.750 in (19 mm)
Max. Table Thickness 1.125 in (29 mm)
Max. weight of custom top 22 oz (0.624 kg)
Width 5.65 in (144 mm)
Depth 5.45 in (138 mm)
Height, opened 5.10 in (130 mm)
Height (below tabletop) 8.75 in (222 mm)
Width (below tabletop) 8.50 in (216 mm)
Depth (below tabletop) 6.125 in (156 mm)
Finish Matte Black
T° Operating 10°C-35°C
T° Maximum 40°C
Humidity
90% non-condensing
Table 2. PNP515/517 Mechanical