Filter
Top Products
O P E R A T I O N
#8405 — QUICKCHILLER INSTALLATION, OPERATION, AND MAINTENANCE
Pg. 14.
Starting from the OFF position,
press the power key
ON.
The Alto-Shaam name will illuminate and the
SELECTION SCREEN will appear on the
display. The compressor will become
energized and will begin to operate if required
by the sensors.
Press the QUICK FREEZE key.
The display will indicate the last operator set
internal compartment temperature.
To change the displayed temperature, press the up or
down arrow key to increase or decrease the
temperature displayed within the parameters of the
Quick Freeze mode.
Press the START/STOP key.
The Display will require the operator to select
between quick freezing by PROBE or by
TIME.
Select the desired Quick Freeze method by
pressing the right or left arrow keys.
After the selection has been made, press the
START/STOP key.
NOTE: MODIFIED COMPARTMENT TEMPERATURE IS NOT
STORED OR SAVED UNTIL THE START BUTTON IS
PRESSED TO BEGIN QUICKCHILLER OPERATION
.
1.
2.
3.
4.
QUICK FREEZE