Amana AKED3060 Cooktop User Manual


 
9
Power Supply Connection
WARNING
!
To avoid risk of electrical shock, personal injury, or
death, make sure cooktop has been properly grounded
and always disconnect it from main power supply
before any servicing.
To avoid risk of electrical shock or personal injury
when connecting copper leads to aluminum house
wiring, use only connectors designed for joining
copper to aluminum. Follow connector manufacturer’s
recommendations closely.
In United States to avoid risk of electrical shock or
personal injury, do not ground through neutral wire if
installed in mobile home or if local codes do not
permit grounding through neutral wire.
In Canada to avoid risk of electrical shock or personal
injury, do not ground through neutral wire.
Cooktop has approximately 36 inches of flexible wire
conduit attached to rear of cooktop. Approximately 6
inches of bare ground wire and 3 insulated wires, black,
red, and white extend beyond end of conduit. Connect
wire leads extending from conduit to house wires inside
junction box (Junction box not included). Refer to local
codes and attach according to options.
Option 1-United States or Canada
(Cooktop Wire—House Wire)
Bare—Ground (Green)
White—Neutral (White)
Red—Power Line (Red)
Black—Power Line (Black)
Option 2-United States Only
(Cooktop Wire—House Wire)
Bare and White—Neutral (White)
Red—Power Line (Red)
Black—Power Line (Black)
W
GRD
A
A—Conduit
W—White neutral wire
GRD—Bare ground wire
Removing and Reinstalling Cooktop
WARNING
!
To avoid risk of personal injury, do not touch surface
elements or area near elements. Surface elements
may be dark in color even when hot. Areas near
elements may be hot enough to burn. During and after
use, do not touch or let clothing or other flammable
material contact surface elements until they have had
time to cool.
1. Turn off circuit breaker or electrical supply.
2. Disconnect cooktop wires from house wires.
See “Power Supply Connection” section.
3. Disconnect cooktop venting.
See “Duct Connections” section.
4. Lift cooktop out of cutout.
5. Reverse procedure to reinstall cooktop.