Filter
Top Products
7
English
Shelving
• The shelves are chrome plated your model purchased. They are designed for flexibility and easy clean-
ing. To accommodate different sized bottles the shelves slide out and can be moved up or down into any
of the tracks molded into the cooler cabinet. Larger bottles or Magnums can be more easily accommodat-
ed on the bottom of the cooler. You will notice that the shelves are designed so the bottles do not line-up
directly over one another. The shelves are designed to allow free air movement and provides more space.
Interior Light
• To complement the look of your wine collection, a soft light has been built into the wine cellar. The light
switch is on the electronic control panel.
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the result of the refrigerant circulating through
the cooling coils.
• The ther
mostat contr
ol will click when it cycles on and of
f.
WINE CELLAR FEATURES AND USE
Initial Setup
•
Once you have plugged the unit into an electrical outlet, let the unit run for at least 30 minutes to
a
cclimate itself before making any adjustments. During this time the Red Wine light will stay on.
Temperature inside the cooler, if not adjusted, will be at 55°-60°F.
•
The wine cellar can be set to any temperature you desire to accommodate your wine storage
requirements. To set the temperature, press both the "White Wine" and "Red Wine" buttons
s
imultaneously and hold for approximately 3 seconds. Now you are in temperature set mode. Decrease
the temperature
by pushing the "White Wine" button and increase the temperature by pressing the "Red
Wine" button. Pressing the appropriate button 3 times will adjust the temperature 3 degrees, press 4 times
equals 4 degrees, 5 times equals 5 degrees, and so on. Once you have selected the temperature you
desire, push the "On/Off" button. Now the wine cellar is programmed and the LED readout will return to
current internal temperature reading.
• There will be a 3 degree variance +/- between the temperature you select and the temperature
indicated on the LED readout. This occurs because the wine cellar activates and deactivates trying to
maintain your desired temperature. There is often a variance between the top and bottom shelves of the
wine cellar. Therefore, if you have set the wine cellar for 50° and have a mix of red and white wines, you
may want to put the white wine on the bottom shelf where the temperature will be cooler, and place the
red wine on the top shelf where the temperature will be warmer.
Down
White
Red
Up on / off