Filter
Top Products
7
Display and Features (some models)
Mute Function
This function mutes the keypad beep sound (except for end of cycle beep) by:
1. Press and hold QTY 2X pad for 3 seconds.
• DOUBLE displays, oven beeps and MUTE displays for 1 second, then
:0 appears in display.
2. To deactivate, press and hold QTY 2X pad for 3 seconds.
• DOUBLE displays, oven beeps and :0 appears in display.
Check Program Pad
This feature allows you to check the programmed cooking time
and power level of any programmed pad.
1. Press CHECK PROGRAM pad.
• CHECK displays.
2. Press desired numeric pad.
• PROG--XX displays (XX indicates program number).
• STAGE-1 displays then flashes to cooking time and power level.
example: 00:30 HI
• display repeats for next stage(s)
3. Press STOP/RESET pad to exit Check Program function.
Program Lock Function
This feature locks the control panel and prevents unwanted oven operations.
1. Press and hold STOP/RESET pad for 3 seconds to activate.
• Oven beeps and :0 along with a key graphic appear in display.
2. Press and hold STOP/RESET pad for 3 seconds to deactivate.
• Oven beeps and key graphic disappears from display.
Power Save Mode
This function is used for saving energy by:
1. Press and hold CHECK PROGRAM pad for 3 seconds.
• CHECK displays, oven beeps and display goes blank.
2. To operate oven in Power Save mode, press any pad.
• :0 displays and all keypad functions will be the same as in normal
mode.
• If keypad is not touched within 10 seconds, display will go blank.
3. To deactivate, press any pad and then hold CHECK PROGRAM pad for 3
seconds.
• CHECK displays and oven beeps.
4. Press STOP/RESET pad to have oven return to normal operating mode.
CHECK
PROGRAM
DEFROST
Defrost Pad
When DEFROST is selected, the automatic cycle divides the defrosting time
into periods of alternating defrost and stand times by cycling on and off.
Maximum defrost time is 60 minutes.
If These Features are
Different from Yours
These features are intended
to show the variety that is
available in the product line. If your
microwave does not have all the
options that are shown, it is not a
mistake. The information provided
applies to several of the models in
the product line.
PROGRAM
DEFROST
QTY
2X
STOP/
RESET
START/
+30 SEC
CHECK
PROGRAM
POWER
LEVEL
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1