Filter
Top Products
5
Introducing the NEW Heat Recovery Ventilators (HRV). As
with previous designs, incoming fresh outdoor air is filtered
before it is heated by the stale outgoing air through a
aluminum heat recovery core. The HRV then distributes the
preheated fresh filtered air throughout the home by direct
ductwork installed specifically for the HRV or through the
ductwork of a forced-air system.
FEATURES:
• Compact Design
• Electrostatic Filters (washable)
• Balancing Dampers Included In Installation Kit
(not factory installed)
• External Screw Type Dry Contacts For Push Button
Timers, Dehumidistats, Crank Timer & Digital Control.
• Easy Core Guide Channels For Removing Core
• Better Packaging For More Protection In Shipping
OPTIONAL CONTROLS
• DMFC – Digital Multi-Function Control
• MD-4W – Mechanical Low Voltage Dehumidistat
with On/Off Switch
• MD-2W – Mechanical Low Voltage Dehumidistat
• RT-15M – 15 Minute Push Button Timer
• CT-30M – 30 Minute Crank Timer
• AQS – Air Quality Sensor
External screw type dry contacts (provided)
SPECIFICATIONS
CASE 22 gauge galvanized steel on the HRV-200 & 24 gauge
galvanized steel on the HRV-150. Baked powder coated
paint. Insulated with 1" (25 mm) high density polystyrene
foam to prevent condensation and meet the requirements of
the Underwriters Laboratories 94HF.
MOTORS Two (2) German-manufactured, factory-balanced
ebm™ motors with backward curved blades. Motors come
with permanently lubricated sealed bearings guarantee long
life and maintenance-free operation. Seven (7) year limited
limited warranty
.*
CORE Aluminum heat recovery core configured for an
efficient cross-flow ventilation. Core is 9" x 9" (229 x 229
mm) with a 15" (380 mm) depth HRV-150 or 12" x 12"
(305 x 305 mm) with a 15" (380 mm) depth HRV-200.
Cores are manufactured to withstand extreme temperature
variations.
FILTERS Two (2) Washable Electrostatic Panel Type Air Filters,
H
RV-150 is 8.5" (216mm) x 15" (380mm) x 0.125" (3mm),
HRV-200 is 11.75" (298mm) x 15" (380mm) x 0.125"
(3mm).
CONTROLS External three (3) position (Low/Stand
By/Medium) rocker switch that will offer continuous
ventilation. We offer a variety of external controls. (see
optional controls)
DEFROST A preset 5 minute defrost sequence is activated at
an outdoor air temperature of 23˚F (-5˚C) and lower.
During the defrost sequence, the supply blower shuts down
& the exhaust blower switches into high speed to maximize
the effectiveness of the defrost strategy
.
The unit then returns to normal operation for 25 minutes,
and continues cycle.
SERVICEABILITY Core, filters, motors and drain pan can be
easily serviced through latched access door. Core
conveniently slides out with ease on an improved railing
system. Electrical box, placed on the outside of the unit, can
also be easily accessed.
* For details concerning warranties, please visit your local dealer.
The product is manufactured by Fantech, Inc. Fantech reserves the right to modify, at any time and without notice, any or all of this product's features, designs, components and specifications.
HRV Series
HRV 150 & HRV 200