Filter
Top Products
TOOLS RECKSSAR¥FOR |NSTAL T|ON*
(2)RATCHET
O 3/16", 1/4", 5/16" SOCKETS
O PHILLIPSSCREWDRIVER
O STANDARDSCREWDRIVER
© WIRE CUTTERS
© CRESCENTWRENCH
© ADJUSTABLEPLIERS
© LEVEL
* (NotindMed: Toolsieqoitedfbr preparing
the cabi_et ope_ing).
UNCRAT|NG
SUPPORTACCESSORIES:
0 3/4" ULApproved Strain Rdief (proqded)
O 2 Appropriate Sized Wire Nuts
O 3/8" Male (NZT.) Compression Elbow
or Flare Elbow
O Thread Sealing Tape or Pipe Thread Compound
O Appropriate Sized Hoseqamp
O 2 Wood Mounting Screws (provided)
Water Hook-Up Kits Available:
(l_atel linewattl vane fitting Teflol_TM mile, tee valve litting)
5' BraidedStainless Stee! Part #19950153
5' Copper Part #19950152
AvailablethroughanautlmrizedMaymgParts Retailer
Remove access and toe panels before beginning installation.
Remove bolts from the crate base brackets, _lsing 5/16" socket with ratchet. Remove crate base and
discard base and packaging. Until distlwasher is permanently instaDd, beware of opening the
door as the onk may tip forward.
Open the door and remove accessory package from silverware basket.
Remove any extra packing material from outside and inside the distlwasher This would include plug in water valve inlet.
Loosen front leg bolts wittl a crescent wrench. Adjust rear leg bolts in same mannei;
NOTE:Make sure you have everything
necessary for proper installation before
going to step 2.
_:: cmcal and watei facd_t_es should enter cabinet o_enm on the flooi o* th*ou ht]lle.,_ "1 " ' ...... ' " "' ' [ ' g ", " " g back or side walls,
?_<as shown in the shaded _ortion of the drawino. PreDrred drain outlet is shown in the _m_er_mrtion of the cabinet in drawing below.
Care should be taken to route phm*bing away from the motor and blower (if equipped). DONOTmake connections until dishwasher
is in poskton Care should be taken to make sure cabinet hales for power cord and hoses have no sharp edges.
cabinet opening dishwasher dimensions
Preferred
DrainArea
Keel*back free
ofdrainwater& [
electricalSUl)!)ly Pt]eferred
I}ljailtArea
24" [
nn
33 3/4" (Min)
35 1/4" (Max)
CUSTOMPANELSAVAILABLEDishwasherscom_ with pre-instaHed pands. Custom pands are avaflaMe: stainDss steal and
trims kits for wood pands. See your authorized selling deMer for a complete list of products
available