Filter
Top Products
13
Manual Time Entry
Manual Time Entry feature allows the operator to enter
time and power levels, and heat without changing the
preprogrammed pads.
1. Open oven door and place food in oven. Display
shows door. Fan and light operate.
2. Close oven door. Display shows MENU and ITEM
flashes.
If oven display does not show ITEM, pads do not
except entries. Open and close oven door or press
STOP/RESET pad to activate pads.
3. Press TIME ENTRY pad.
Display shows 0000.
4. Press number pads to enter desired cooking time.
5. Press POWER LEVEL pad if power level other than
100 percent is required.
Display shows COOK LEVEL and current power
level if other than 100 percent power.
6. Press number pad to enter desired power level. For
example, pressing 2 pad is 20 percent power.
7. Press START pad and oven operates.
Display shows POWER when microwave energy
is present. If power level other than 100 percent
power was programmed, display shows COOK
LEVEL and power level. Display counts down
cooking time.
8. Oven stops and signals when timing sequence is
finished.
Display shows EOC.
9. Open oven door and remove food.
Operation
Preprogrammed Pads
Oven contains two menus with 10 preset number pads
each. Heating times and power levels can be adjusted to
fit menu requirements.
Number pads come preprogrammed from factory to
operate at full power for following times. MENUS 1 and 2
pads are programmed identically at factory.
Instructions are written for factory programmed ovens.
Ovens that are reprogrammed may respond differently
than described below.
1. Open oven door and place food in oven. Display
shows door.
Fan and light operate.
2. Close oven door. Display shows MENU and ITEM
flashes.
If oven display does not show ITEM, pads do not
except entries. Open and close oven door or press
STOP/RESET pad to activate pads.
3. Press desired menu pad if different than display.
4. Press QUANTITY pad to increase quantity up to 4
items.
Cooking times are calculated automatically.
5. Press desired number pad and oven operates.
Display shows item selected and heating time
counts down.
Display shows POWER when microwave energy
is present.
6. Oven stops and signal sounds when timing sequence
is finished.
Display shows "EOC".
7. Open oven door.
Pads Time Power Level
1 10 sec. 100%
2 20 sec. 100%
3 30 sec. 100%
4 45 sec. 100%
5 1 min. 100%
6 1 min. 30 sec. 100%
7 2 min. 100%
8 3 min. 100%
9 4 min. 100%
0 5 min. 100%