Filter
Top Products
www.amanacommercial.com
Part No. 12392762
Printed in U.S.A. 02/01
2001 Amana Appliances
Amana, Iowa 52204
Quick Reference Instructions
Read Important Safety Information before using Quick
Reference Instructions. If there are unanswered
questions, see detailed sections of this manual.
Preprogrammed Pads
1. Open oven door and place food in oven. Display
shows door.
2. Close oven door. Display shows MENU and ITEM
flashes.
3. Press desired menu pad if different than display.
4. Press QUANTITY pad to increase quantity up to 4
items.
5. Press desired number pad and oven operates.
6. Oven stops and signal sounds when timing sequence
is finished.
Manual Time Entry
1. Open oven door and place food in oven. Display
shows door. Fan and light operate.
2. Close oven door.
3. Press TIME ENTRY pad.
4. Press number pads to enter desired cooking time.
5. Press POWER LEVEL pad if power level other than
100 percent is required.
6. Press number pad to enter desired power level. For
example, pressing 2 pad is 20 percent power.
7. Press START pad and oven operates.
8. Oven stops and signals when finished.
Changing Preset Number Pads
1. Open oven door. Display shows door.
2. Press pad 1 for five seconds.
3. Press ADD pad.
4. Press desired menu pad. Display shows active
menu.
5. Press desired number pad.
6. Press number pads to enter desired cooking time.
7. Press POWER LEVEL pad if power level requires
change.
8. Press START pad to enter new heating time and
power level in oven memory.
9. Press STOP/RESET pad or close oven door to exit
programming mode.
Programming Multiple Heating Stages
1. Complete steps 1-7 of "Changing Preset Number
Pads".
2. Press STATUS pad to move through stages from
lowest to highest (1 to 4).
3. Press number pads to enter desired cooking time
and power level.
4. Repeat steps 2-3 for additional stages.
5. Complete steps 8-9 of "Changing Preset Number
Pads".
Cook Levels and Hold
Set oven to cook using between 10 and 100 percent
cooking power. If food requires time between cooking
cycles without microwave energy, use HOLD pad.
When HOLD pad is used, oven operates for cooking
stage without producing microwave energy.
Programming Pause
Pause is used to stop microwave power halfway through
cooking cycle as a reminder to manipulate food.
Press PAUSE pad after entering cooking time.
Oven stops, displays "PAUS" and signals three times
halfway through cooking cycle. "PAUS" remains in
display until door is opened or STOP/RESET pad is
pressed.
To resume microwave power, close oven door and press
START pad. Pause can be programmed into menu
items, and can also be programmed when using time
entry.
If oven fan is not operating during pause, open oven
door and press START pad to resume operation.
Deleting Heating Stages
1. Open oven door. Display shows door.
2. Press pad 1 for five seconds.
3. Press desired number pad to be deleted.
4. Press DELETE pad twice.
5. Press STOP/RESET pad or close oven door to exit
programming mode.
Modifying User Time Limits
1. Complete steps 1-3 of "User Options".
2. Press desired menu pad to change. Current user
time limit displays. Display shows active menu.
3. Press numbers to enter desired heating time limit.
Display shows new heating time limit.
4. Press corresponding menu pad again to save time
limit. For example, if changing heating time limit for
MENU 1, press MENU 1 pad.
5. Press STOP/RESET pad or close oven door to exit
programming mode.
User Options
1. Open oven door. Display shows door.
2. Press and hold pad 1 for approximately 5 seconds.
3. Press hidden enable pad.
4. Press START pad to advance to other options.
5. Press STATUS pad to change option.
6. Repeat steps 4-5 to change additional options.
7. Press hidden enable pad to return to programming
mode.