Filter
Top Products
9
Chiller Fresh
™
System (some models)
Chiller Fresh
™
system features a drawer inside a sleeve.
Air circulates between drawer and sleeve. This system
keeps food fresh longer and up to 5°F (3°C) colder than
refrigerator temperature.
Chiller Fresh
™
control is located below front shelf trim.
Control adjusts amount of air circulating around drawer.
Slide control to
cold
for normal refrigerator temperature
and to
coldest
for colder temperature. Ice crystals may
form on drawer or food on
coldest
setting. Cold air can
decrease refrigerator temperature. Refrigerator control
may need to be adjusted.
• Remove drawer by lifting and pulling out. Remove shelf
by lifting front, releasing hooks from metal track then
pulling out.
• Replace shelf by inserting hooks into metal track and
lowering front. Use slots 8 through 11 only. Replace
drawer by sliding in. Confirm boot is over air inlet in
side wall.
Chiller Fresh System
Deli Fresh Drawer (Some models)
• Remove drawer by lifting and pulling out. Remove shelf
by lifting front, releasing hooks from metal track then
pulling out.
• Replace shelf by inserting hooks into metal track and
lowering front. Replace drawer by sliding in.
Garden Fresh
™
Crispers
Garden Fresh
™
crispers keep produce fresh longer. Wrap
produce tightly. Do not wash produce before placing in
crispers. Excess moisture could cause produce to spoil
prematurely. Do not line crispers with paper towels. Paper
towels will retain moisture.
Garden Fresh
™
control is located below front shelf trim.
Control adjusts humidity in crispers. Slide control to
high
for produce with leaves such as lettuce, spinach or
cabbage. Slide control to
low
for produce with skins such
as cauliflower, corn or tomatoes.
Refrigerator Features
Caution
To avoid property damage, confirm shelf is secure
before placing items on shelf.
Refrigerator Shelves
Models feature either glass or wire shelves. Shelves
adjust up or down to meet individual storage needs. Some
models feature Spillsaver
™
shelves. Spillsaver
™
shelves
hold simple spills for easier cleaning.
Caution
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
• Remove shelves by lifting front, releasing hooks
from metal track then pulling out.
• Replace shelves by inserting hooks into metal track
and lowering front.
Some models also feature EasyGlide
™
shelves that pull
forward for easy access of items in back.
B
A
A. Spillsaver™ Shelf
B. EasyGlide™ Shelf (some models)
Shelves