Filter
Top Products
25
Installation Instructions
FOR YOUR SAFETY
Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance. If you smell gas:
Open windows.
Don’t touch electrical switches.
Extinguish any open flame.
Immediately call your gas supplier.
4
3
2
1
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• Pipe joint sealant or UL-approved pipe
thread tape with Teflon* that resists action
of natural and LP gases
• Flexible metal appliance connector (1/2″ I.D.)
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing
a new range.
• Flare union adapter for connection to gas
supply line (3/4″ or 1/2″ NPT x 1/2″ I.D.).
• Flare union adapter for connection to
pressure regulator on range (1/2″ NPT x
1/2″ I.D.)
• Liquid leak detector or soapy water.
• Lag bolt or 1/2″ O.D. sleeve anchor (for
concrete floors only).
• Long matches and/or match holder (for
models equipped with standing pilots).
*Teflon: Registered trademark of DuPont
TOOLS YOU WILL NEED
Flat-blade screwdriver
3/16″ or smaller
Pipe wrenches (2)
(one for backup)
Phillips screwdriver
Open-end or
adjustable wrench
Pencil and ruler
Level
Drill, awl or nail
PART INCLUDED
Anti-tip bracket kit