Filter
Top Products
VERTICAL CONTACT TOASTER
2
P/N 1010807 Rev. E 06/06
General
The Vertical Contact Toaster, Model VCT-1000, is
designed for contact toasting of buns. The toaster
design allows the operator to place buns on both
sides of the heated Platen at the same time. Buns are
placed into the top of the toaster and uniform, golden
brown, warm buns are then retrieved at the bottom of
the toaster in approximately 10 seconds.
This manual provides the safety, installation and oper-
ating procedures for the Vertical Contact Toaster. We
recommend that all information contained in this manu-
al be read prior to installing and operating the unit.
Your Vertical Contact Toaster is manufactured from
the finest materials available and is assembled to
Roundup’s strict quality standards. This unit has been
tested at the factory to ensure dependable trouble-free
operation.
Warranty Information
Please read the full text of the Limited Warranty in this
manual.
OWNER INFORMATION
TABLE OF CONTENTS
IMPORTANT! Keep these instructions for future reference. If the unit changes
ownership, be sure this manual accompanies the equipment.
If the unit arrives damaged, contact the carrier imme-
diately and file a damage claim with them. Save all
packing materials when filing a claim. Freight damage
claims are the responsibility of the purchaser and are
not covered under warranty.
The warranty does not extend to:
• Damages caused in shipment or damage as
result of improper use.
• Installation of electrical service.
• Normal maintenance as outlined in this manual.
• Malfunction resulting from improper maintenance.
• Damage caused by abuse or careless handling.
• Damage from moisture into electrical
components
• Damage from tampering with, removal of, or
changing any preset control or safety device.
Owner information .....................................................2
General ......................................................................2
Warranty Information .................................................2
Service/Technical Assistance ....................................3
Important Safety Information ....................................4
Specifications .............................................................5
Electrical Ratings .......................................................5
Electrical Cord & Plug Configurations .......................5
Model Designation .....................................................5
Dimensions ................................................................6
Installation ...................................................................7
Unpacking ..................................................................7
Assembling the Unit ..................................................7
Installing the Optional Belt Wraps and Roller
Tensioners ................................................................8
Equipment Setup .......................................................9
Operation ...................................................................10
Operating Instructions ............................................ 10
Safety Features ...................................................... 10
Maintenance ..............................................................11
Daily .........................................................................11
Replacing the Release Sheet (Every 4 - 6 weeks) 12
Replacing Optional Belt Wraps and Measuring the
Conveyor Belt Chains and Optional Roller Tensioners
(Every 3 - 6 months) ............................................... 12
Conveyor Belt Chains ............................................. 13
Adjusting conveyor Belt Chains .............................. 13
Replacing the Optional Roller Tensioners .............. 14
Replacing the Spring Tensioners ............................ 14
Measuring the Optional Roller Tensioners ............. 14
Troubleshooting .......................................................15
Wiring Diagram .........................................................17
Replacement Parts ...................................................18
Optional Parts – VCT-1000 ......................................23
LIMITED WARRANTY ...............................................24