Ariston LFF 8M5 Dishwasher User Manual


  Open as PDF
of 16
 
EN
11
* Only available in selected models.
Wash options*
The OPTIONS may only be set, modified or reset after the
washcyclehasbeenselectedandbeforetheStart/Pause
button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible with the
selected wash cycle
(see Table of wash cycles)
, the correspond-
ingLEDflashesrapidly3timesand2shortbeepswillsound.
If an option is selected which is incompatible with another (previ-
ously selected) option, the indicator light corresponding to the
option selected first will flash 3 times, 3 beeps will sound and it
will be deselected, while the most recently selected option will
remain active.
To deselect an option which has been set by mistake, press the
corresponding button again.
Multi-functional tablets
This option optimises washing and drying results.
When usingmulti-functionaltablets, pressthe MULTI-
FUNCTIONAL TABLETSbutton;the correspondingindicator
light will illuminate. If the button is pressed again the option will
be deselected.
The “Multi-functional tablets” option results in the
lengthening of the wash cycle.
The use of tablets is only recommended when the MULTI-
FUNCTIONAL TABLETS option is available.
This option is not recommended for use with wash cycles
which do not specify the use of multi-functional tablets.
Good Night option
This option reduces the amount of noise made by the machine
and lengthens the wash cycles. It is a useful option because it
enables users to benefit from the night-time energy rate.
After selecting the wash cycle, press the Good Night option but-
ton; the illumination of the corresponding indicator light followed
by a short beep indicates its selection.
To deselect the option, press the same button again.
The Good Night option is not compatible with the
HALF LOAD option.
Special wash cycles and
Options
Half load using the upper rack
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button: the
indicator light will illuminate and the wash cycle will take place
only in the upper rack.
Remember to load the upper rack only, and to reduce
the amount of detergent accordingly.
It is better to use powder detergent in this case.
This option is not compatible with the following wash
cycles: Speed and Baby.
Delayed start
It is possible to delay the start time of the cycle for a period of
time between 1 and 24 hours.
1.Afterselectingthedesiredwashcycleandanyotheroptions,
presstheDELAYEDSTARTbutton:thecorrespondingindicator
light will illuminate. Use the same button to select the time at
whichyouwishthewashcycletobegin(afteraperiodof1to
24hours).
2. Confirmyourselection usingthe Start/Pausebutton; the
countdown will begin. The selected delay period indicator light
flashes andtheStart/Pause buttonstops flashing(the light
becomes fixed instead).
3.When theset timehaselapsed, along beepsounds,the
DELAYED STARTindicator lightswitches offandthe wash
cycle begins.
TodeselecttheDELAYEDSTARToption,presstheDELAYED
STARTbuttonrepeatedlyuntilthetextOFF appears.
The Delayed Start function cannot be set once the wash
has been started.
 previous next