Filter
Top Products
10
IT
GB
Fix the power cable with the clip.
The power cable must be long enough to allow the appliance to be
extracted from the cabinet to fill the coffee bean container.
The appliance must be earthed in compliance with legislation.
Electrical connections must be performed by a qualified
electrician following the instructions.
Position the appliance on the rails, making sure the pins are cor-
rectly inserted in the housings, then fix it with the screws supplied.
If necessary, correct alignment of the appliance by positioning the
spacers supplied under or at the sides of the support.
x 16 x 2
Position the rails on the sides of the cabinet as shown in the figure.
Fix with the screws supplied, then extract them completely.
If the coffee maker is installed over a warmer drawer, use the top
surface of this as a reference to position the rails.
In this case, there will be no surface to rest the rails on.
approx. 350m
m
x 1
x 4
x 4
560 + 1 mm