Filter
Top Products
6
Using the Stainless Steel Water Kettle
1. Before first use, make sure the kettle, power base and power cord are in good condition and are
completely dry.
2. Remove the kettle from the power base, open the lid and fill the kettle with the desired amount of
water. Do not fill past the ‘MAX’ mark.
3. Close the lid, ensuring it locks closed.
4. Place kettle onto the power base and plug in the unit.
5. Press the ‘Power Lever’, located on the base, to the down postion to activate the kettle. The
indicator light will illuminate while the kettle is in operation.
6. Do not open lid while water is boiling.
7. Once water has reached a boil, the kettle will release the ‘Power Lever’ to the up position, the
kettle will turn off and the indicator light will blink.
8. If no further heating is required, unplug the kettle from the wall for additional safety.
9. Lift the kettle off the power base before pouring.
10. After pouring, ensure that the bottom of the kettle and the power base are dry. Place the kettle
back onto the power base.
BEFORE FIRST USE:
5
Parts Identification
Water
Level
Indicator
Power Base
™
Kettle Body
Handle
Kettle Lid
w w w . A r o m a C o . c o m / F o r t e
Lid Release
Button
Power Lever
Power Cord
Spout Filter