Filter
Top Products
8
Troubleshooting
PROBLEM POSSIBLE REASON SOLUTION
The kettle and
indicator light do not
work when the power
lever is pressed down.
Unit has no power. Check that the cord is plugged
into the outlet and the kettle is
properly connected to the power
base.
The water is boiling but
the switch does not
automatically turn off.
The lid is not closed
properly.
Close the lid until it locks into
place.
The power switch
cannot be pressed
down and the kettle
will not work.
The kettle is not
properly placed on
the power base.
Ensure that the kettle is attached
correctly and that the connection
to the power base is not blocked
in any way.
w w w . A r o m a C o . c o m / F o r t e
11. To disconnect, turn any control to the off position, then remove the plug from outlet. Never
unplug by pulling the cord.
12 Do not use kettle for anything other than its intended use.
13. The power base must only be used with the provided kettle.
14. This kettle is only intended to heat water.
15 Do not unscrew any screws on the kettle or power base.
16. Do not move kettle during the heating process.
17. Do not immerse in water.
18. Scalding may occur if the lid is removed during the heating process.
IMPORTANT SAFEGUARDS
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other); follow the instructions
below:
To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid hazard.
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
3
™
S A V E T H E S E I N S T R U C T I O N S