Filter
Top Products
Main Confi
g
uration Window
–
S
y
stem Settin
g
Tab
Clicking the SYSTEM SETTING tab opens a system window for the selected mixer. The system window
contains global settings for the mixer.
This window contains sections for:
Mixer Output
Threshold
Gate Processing
Operational Mode
Each section can be reset to factory
defaults by clicking the initialize
button associated with the section.
The “Master Copy” button allows the
global settings to be copied to slave
mixers.
Output Section
This section contains overall settings that affect the mixer’s output.
OUTPUT ATTENUATOR
Sets the mixer’s output to –35 dB (MIC) or 0 dB (LINE) level.
LIMITER
Turns the overall limiter circuit on or off. When on, the limiter helps prevent
distortion caused by loud audio peaks.
NOMA (Number of Open Microphones Attenuated)
Turns NOMA on or off.
OUTPUT INDICATOR
Selects whether the mixer output is displayed on the mixer’s front panel before
or after the master volume control.
INITIALIZE
Clicking this button returns the output settings to factory default.
9