Avanti BCAD338 Refrigerator User Manual


 
10
OPERATING YOUR BEVERAGE COOLER
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78 ºF (22º - 26ºC).
If the ambient temperature is above or below recommended temperatures, the performance of the
unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause
interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be reached.
Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).
ON/OFF POWER
To turn ON or OFF the appliance, press the button/mark .
You can press UP and DOWN buttons/marks to control the internal temperature .
SETTING THE TEMPERATURE CONTROL
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
DOWN button/mark once.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.
When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having
been shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Beverage Cooler is running for a few hours everything will be back to
normal.
Also, as cold air falls and warm air rises, there could be a slight temperature variance between
the top and bottom shelves.
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window.
IMPORTANT SAFEGUARDS
Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent
spoilage.
As a natural result of condensation, in summer months or areas of high humidity, the glass door
may build up moisture on the outside. Just wipe it away.