Avanti BCAD338 Refrigerator User Manual


 
12
CARE AND MAINTENANCE
REPLACING THE FLUORESCENT INTERIOR LIGHT
NOTE:
All parts removed must be saved to do the replacement of the fluorescent light.
Before removing the fluorescent light, either turn off the appliance or disconnect the electricity
leading into the appliance at the main power supply. Failure to do so could result in electrical
shock or personal injury.
Turn off the fluorescent light.
Pull down to remove the fluorescent light cover (3) softly.
Rotate the fluorescent light (2) 90° and pull down to remove it from the light holder (1) softly.
Replace with a T-4 fluorescent light that is the same shape and size.
Replace the light cover (3).
1. Light Holder
2. Fluorescent Light T4(8W)
3. Light Cover
Turn off the power, unplug the appliance, and remove all items including shelves.
CLEANING YOUR BEVERAGE COOLER
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your contents.
POWER FAILURE
Remove all items.
MOVING YOUR BEVERAGE COOLER
Securely tape down all loose items (shelves) inside your appliance.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. Also protect
outside of appliance with a blanket, or similar item.
ENERGY SAVING TIPS
The Beverage Cooler should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.