Filter
Top Products
14
You can check the clock time while cooking is in
progress by touching the CLOCK pad.
NOTE: ONCE THE TIME HAS BEEN SET IT WILL
CONTINUE TO SHOW UNTIL THE UNIT IS
UNPLUGGED OR POWER LOST.
cancel TIMER during timing process.
20BSETTING A COOKING PROGRAM
38B
A. One-stage Cooking
1. Use the number pads to set a cooking time.
You can set a cooking time from one second to
99 minutes and 99 seconds.
2. If you want to set a power level other than
100% power, touch POWER, then use the
number pads to enter the power level. You can
set the power level from 1 to 9.
Use single digits to set a cooking power level:
3. Touch START/MINUTE PLUS to start cooking.
Number pad Cooking power
9
90%
8
80%
7
70%
6 60%
5 50%
4 40%
3 30%
2
20%
1
10%
B. Multi-stage Cooking
For added convenience your oven offers the ability
to operate in a “Multi-Stage” cooking cycle. Each
cycle or stage can be set with a separate cooking
time and or power level.
a) To set the oven in Multi-Stage cooking
model, simply set the time and power level
of the first stage (as described in Section
One-Stage Cooking to the left).
b) To set the second cooking stage, press the
COOK key (“MEM” will appear in the
display window).
c) Select the desired cooking time and power
level for the second stage.
d) Press “Start/MINUTE PLUS” to begin the
cooking process.
NOTE:
After cooking stage 1 has elapsed, you will hear
one “beep” sound, signaling the beginning of
stage 2. After the total time (selected cooking
times for both stages) has elapsed, 4 “beeps”
will sound and “END” will appear in the display
window. Touch the “STOP/RESET”
button or
open the oven door to clear or end the cooking
program before starting another cooking
function.
SPEED DEFROST
1. Touch SPEED DEFROST.
2. Enter desired defrosting time by touching
correct number pads. Digital timer sets minutes
and seconds from left to right so a single digit
can be set (5 for 5 seconds ) or up to 4 digits
(2405 for 24 minutes 5 seconds).
3. Touch START/MINUTE PLUS.
NOTE:
After time has elapsed four signals sound and END
appears in display. Touch STOP/RESET pad or
open door to clear END before starting another
cooking function. During defrosting program, the
system will pause and sound beeps to remind user
to turn food over, and then press START/MINUTE
PLUS to resume the defrosting.
COOK BY WEIGHT
1. Touch COOK BY WEIGHT.
2.
Enter the one digit code by touching the
correct number 1~3 (shown below) pad .
3. Enter weight.
4. Touch START/MINUTE PLUS pad.
Cook By Weight Code Description
CODE TYPE MAX WEIGHT
1 Beef 5 lb. 16 oz.
2 Mutton 5 lb. 16 oz.
3 Pork 5 lb. 4 oz.
Note:
Weight must be in pounds and ounces.
DEFROST BY WEIGHT
5. Touch DEFROST BY WEIGHT pad.