Filter
Top Products
11
The LED indicator on the upper display will flash. Then press the UP or DOWN buttons to get the
desired temperature.
? When you press the SET button again, the LED indicator on the lower display will flash. Then
proceed to press the UP or DOWN buttons to get the desired temperature in the lower section.
? The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button once, on
the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button once.
? When you store mostly red wines, the temperature which you control by pushing the above two
buttons need to be set at between 60 to 65? F and the LED lamp near “RED” will be lit.
? When you store mostly white wines, the temperature needs to be set at between 50 to 59? F and
the LED lamp near “WHITE” will be lit.
? When you store mostly sparkling wines, the temperature needs to be set at between 45 to 49? F
and the LED lamp near “SPARKL” will be lit.
? You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ?C
button.
? You can select temperature display setting from Celsius to Fahrenheit degree by pushing the ? F
button.
? Fahrenheit and Celsius degrees indicator will appear on either the upper or lower displays .
RED: RED WINES 60 –65? F
WHITE: WHITE WINES/DRY 50 - 59? F
SPARKL: SPARKLING WINES/ROSE WINES 45 - 49? F
ROSE: ROSE WINES 49 - 51? F
STORAGE
Many bottles may differ in size and dimensions . As such the actual number of bottles you may be able
to store may vary.
NOTE: You can place 10 standard bottles in the upper zone and 18 standard bottles in the lower
zone.
INTERIOR LIGHT
? Interior light is only available in the lower zone .
? You can turn the interior light on by pushing the LIGHT ON/OFF button.
? The light will turn off automatically if it remains ON for 10 minutes or more.
DOOR LOCK
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock
and turn it counterclockwise to unlock the door. To lock the door do the reverse operation marking
sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
CARE AND MAINTENANCE
REPLACING YOUR LIGHT BULB
NOTE: