6
OPERATION
Use and Care (Assembly)
To use your
smoothie m
aker
, begin by assembling the mixing jar.
aker, begin by assembling the mixing jar.aker
1. Position the rubber gasket down onto the circular fl at surface in the blade
base.
2
.
Screw b
lade base on the bottom of the mixing
jar
by twisting the blade base
clockwise until tightened onto the mixing jar. Make sure that the blade base is
tightly fastened to the mixing jar and that the rubber gasket is properly com-
pressed between the mixing jar and the blade base.
3
.
Push the lid onto the top of the mixing jar. Place the clear lid cap in the center
of the lid or place the stir stick through the center of the lid if blending liquids
or frozen drinks.
4. Place the mixing jar onto the motor base so that the bottom of the blade base
is sitting fl at on the motor base.
5
.
Plug in the cord. Your
smoothie maker
is now ready to use
!
Stir Stick
Blender Cap
Rubber Gasket
Blade Base
Lid Cap
Dispensing Valve
Motor Base
Lid
Mixing Jar