Filter
Top Products
Gas Pressure Fryer Operation
21
Table 2. Product Programming Procedure
STEP ACTION DISPLAY COMMENTS
1 Press the FILTER/OFF/FRY
switch to FRY.
LOW
2 Press PROG on the keypad. PROGRAM CODE
3 Input 1724 and press ENTER. PROGRAM PRODUCT #
4 Select the program product
number (1-8).
PROGRAM PRODUCT X X refers to the program number
you selected.
5 Press ENTER. PROGRAM TIME1
00:00
This command allows you to
specify the cooking time for this
stage. The time displayed may be
a previously programmed value.
6 Press TOGGLE/CLEAR and
input the number of minutes you
want to cook.
PROGRAM TIME1
XX:XX
XX:XX refers to the number of
minutes you input.
7 Press ENTER. PROGRAM TEMP1
000 °F
This command allows you to
specify the cooking temperature for
this stage. The temperature
displayed may be a previously
programmed temperature. The
temperature scale may also display
°C depending on the system option
that is set.
8 Press TOGGLE/CLEAR and
input the cooking temperature for
product to be cooked.
PROGRAM TEMP1
XXX °F
XXX refers to the cooking
temperature you input.
9 Press ENTER. PROGRAM TEMPCOM1
FLEX TIME
This command enables you to
select whether or not time is
allowed for the fryer to recover
from temperature loss while
cooking during this stage. The
FLEX TIME option will allow the
fryer to recover from temperature
loss.
10 Press TOGGLE/CLEAR until the
desired option is displayed.
PROGRAM TEMPCOM1
X
X refers to the temperature
compensation option selected.
11 Press ENTER. PROGRAM VALVE1
CLOSED
This command allows you to
specify whether the solenoid valve
will be open or closed during this
stage.
12 Press TOGGLE/CLEAR until the
desired option is displayed.
PROGRAM VALVE1
X
X refers to the solenoid valve
option selected. OPEN is used for
Models ALF and BLF Automatic
Lift fryers. If your program requires
the solenoid valve to be closed
while cooking, choose the
CLOSED option.