Filter
Top Products
Sandwich/Fry Warmer Installation
10
8. Using a 1/8” drill bit, drill holes in countertop through existing holes in the main unit and collar weldment
flanges.
9. Secure main unit and collar weldment to countertop using #8 sheet metal screws.
10. Feed power cord (supplied), down through hole in countertop.
11. Reattach louvered blower box to main unit.
12. Seal main unit to the countertop to conform to NSF Standard 4, Item 4.28. (Dow Corning RTV #732 Multi
purpose Sealant.)
13. Place the blower pan into the hole making sure that open side of the pan fits over the two tabs on the
louvered blower box.
14. Place the perforated pan insert into the blower pan.