Filter
Top Products
Sandwich/Fry Warmer Operation
12
Item # Description Function
1 Upper Sandwich Warmer
TOP HEAT temperature
control
Controls the temperature of the Upper Sandwich Warmer ceramic
heaters.
2 Upper Sandwich Warmer
TOP HEAT pilot light
Cycles on and off to indicate when the Upper Sandwich Warmer
ceramic heaters turn on and off.
3 Upper Sandwich Warmer
BOTTOM HEAT
temperature control
Controls the temperature of the Upper Sandwich Warmer heating
element.
4 Upper Sandwich Warmer
BOTTOM HEAT pilot light
Cycles on and off to indicate when the Upper Sandwich Warmer
heating element turns on and off.
5 LIGHTS ON/OFF Switch
for Upper and Lower
Sandwich Warmer
Controls power to the Sandwich Warmer lights.
6 Lower Sandwich Warmer
TOP HEAT temperature
control
Controls the temperature of the Lower Sandwich Warmer ceramic
heaters.
7 Lower Sandwich Warmer
TOP HEAT pilot light
Cycles on and off to indicate when the Lower Sandwich Warmer
ceramic heaters turn on and off.
8 Lower Sandwich Warmer
BOTTOM HEAT
temperature control
Controls the temperature of the Lower Sandwich Warmer heating
element.
9 Lower Sandwich Warmer
BOTTOM HEAT pilot light
Cycles on and off to indicate when the Lower Sandwich Warmer
heating element turns on and off.
10 Sandwich Warmer POWER
ON/OFF Switch
Controls power to the upper and lower Sandwich Warmers.
11 Fry Warmer ON/OFF
Switch
Controls power to the entire Fry Warmer.
Unit Startup and Preheating
SFW
1. Connect the plugs of the power cords into receptacles that match the power rating specified on the rating
tag.
2. Place the Fry Warmer ON/OFF switch to the ON (1) position. The switch should illuminate red, the bulb
should light and the chute and perforated pan should begin to heat up.
3. Place the Sandwich Warmer POWER ON/OFF switch to the ON (1) position.
4. Place the TOP HEAT and BOTTOM HEAT temperature control knobs on each sandwich warmer (upper
and lower) to the number 5 position. The pilot lights will cycle on and off to maintain proper sandwich
warmer temperature.
5. Place the Sandwich Warmer LIGHTS ON/OFF switch to the ON (1) position. The switch should illuminate
red.
6. Allow the equipment to preheat for 30 minutes before loading it with product.