INTRODUCTION
GENERAL INSTALLATION
Your hot food deli case has been completely assembled and tested before despatch.
It has been packed for safe shipment to your premises; any accessories may have been packed
separately.
Check all parts and accessories against the delivery note.
Before connecting to the power supply, ensure that all packaging has been removed.
Check that the voltage shown on the Data Rating Plate conforms to your power supply.
WARNING - THIS APPLIANCE MUST BE EARTHED
The cabinet has been fully wired internally at BKI and is supplied with separate mains terminal
blocks for power supply connections by the electrical contractor.
Note:
Any accessories may have been supplied or packed separately, check all parts and accessories
against the delivery note.
Ensure that all packaging has been removed before switching on.
The Temperature controller will be factory set and locked to give an average cabinet air
temperature of 75
0
C.
Our Engineer/Trainer will make any final adjustment following installation.