Filter
Top Products
4
Mounting Instructions for Wall Bracket
Note: This mounting hardware is meant for dry wall/stud mounting only. If walls are
concrete, brick or plaster, please consult your local hardware store for assistance. Do not
use or attach wire for hanging the wall bracket; it is meant to be mounted with
appropriate wall screws.
Tools needed:
Level, Tape Measure, Stud Finder, #3 Slotted Screwdrivers, Pencil
Hardware included (Not in all models):
- (2) Metal Screws
- (2) Dry Wall Anchors (for dry wall only)
For stud mounting, anchors are not required; use only the screws.
Mounting Instructions:
- Determine your desired hanging location. Measure the distance between the two
slots provided on the back of the wall bracket, making sure to take the
measurements from the centers of both slots. The distance between the slots
should be 4cm or approximately 1½”.
- Mark the wall with the pencil, using this distance. Use a level and a tape
measure to ensure a level installation.
Mounting Considerations:
Do not install this bracket:
- closer than 1m or 40” from a door or window
- closer than 1m or 40” from a ceiling or floor directly over or next to a power outlet
underneath or over a sink or a basin or under a table over or near any
portion of a heating or cooking appliance
Also: To reduce the risk of fire or electric shock, do not operate any heating appliance
beneath the mounted unit.