Filter
Top Products
Manual 2100-498B
Page 4 of 17
INSTALLATION
BASIC INSTALLATION
1. Unpack the ventilator assembly which includes the
integral ventilator with attached electrical harness,
blank-off plate and miscellaneous hardware.
2. Remove and save the existing exterior blower
access and service access panels (see Figure 1).
3.
Remove and discard exhaust cover plate (see Figure 1).
4. In rear of opening towards duct connection, install
exhaust opening adaptor plate (included).
WARNING
Open and lock unit disconnect switch before
installing this accessory to prevent injury or
death due to electrical shock or contact with
moving parts. Turn thermostat to off.
MIS-2416
FRONT DOOR
VENT OPTION
PANEL
VENT TERMINAL
RIGHT FRONT
CORNER
EXHAUST COVER
PLATE
FIGURE 1
REMOVAL OF EXTERIOR PANELS
MIS-2414
CRV UNIT
EIFM UNIT