Filter
Top Products
6
Instructions for useGB
Cleaning and care
1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or abrasive
substances, soap, household cleaner,
detergent or wax polish for cleaning.
3. Use lukewarm water to clean the cabinet
of the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the
temperature control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8. Check door seals regularly to ensure they
are clean and free from food particles.
9. Never:
• Clean the appliance with unsuitable material;
e.g. petroleum based products.
• Subject it to high temperatures in any way,
• Scour, rub etc., with abrasive material.
10. Removal of dairy cover and door tray :
• To remove the dairy cover, first lift the cover
up by about an inch and pull it off from the
side where there is an opening on the cover.
• To remove a door tray, remove all the contents
and then simply push the door tray upwards
from the base.
11. Make sure that the special plastic tray at
the bottom of the appliance which collects
defrost water is clean at all times. If you want
to remove the tray to clean it, follow the
instructions below:
•Take out the ventilation cover that is located
at the bottom of the appliance by pulling it
toward yourself.
•Pull out the plastic tray at the bottom.
•Put this tray in its place after cleaning it with
soapy water.
•Insert the bottom ventilation cover in its place
by pressing.
Note: Never use gasoline or similar materials
for cleaning purposes.
Sliding storage boxes (Fig. 10)
This accessory is designed to use the door
shelves’ volume more efficiently. It’s property
of moving right or left helps to easily settle
high bottles to the lower shelf.
Temperature adjustable compartments
(Fig. 6)
These compartments are designed for optional
usage. You can either use these compartments
for zero temperature compartment or for
second floor crisper when you need extra
volume for your vegetables.
Attention! You can extend your fridge’s volume
by removing the left-side second floor crisper.
To do this, pull the crisper and the crisper will
stop because it will reach the stopper. Raise
the front part of the crisper 1 cm., repull the
crisper and it will be removed easily. The right-
side second floor crisper can be moved right
and left by the help of its sliding mechanism.
So you can move this compartment according
to the volume of the pots in the fridge.
Replacing the interior light
bulb
Should the light fail, switch off at the socket
outlet and pull out the mains plug.
Then ensure the bulb is screwed securely in
the bulb holder. Replace the plug and switch
on.
If the light still fails, obtain a replacement E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it.
Carefully dispose of the burnt-out light bulb
immediately.